Transmitter Map

Transmitter Type:

Kippure (Dublin & east): VHF/UHF
Truskmore (Sligo, Mayo & Donegal): VHF/UHF
Maghera (Galway & Clare): VHF/UHF
Mullaghanish (Cork and Kerry): VHF/UHF
Mount Leinster (Midlands): VHF/UHF
Carin Hill (Louth): UHF
Three rock Dublin city & county): UHF
Clermont Carn Louth): UHF
Holywell Hill (Derry and Donegal): UHF
Spur Hill (Cork CIty): UHF

COMMTEL 52 ELEMENT AERIAL KIT

COMMTEL 52 ELEMENT AERIAL KIT

THE BRILLIANT DIY 52 ELEMENT COMMTEL AERIAL KIT IS A WIDEBAND DIGITAL AERIAL EXCELLENT FOR RECEIVING BOTH ANALOGUE AND DIGITAL TV SIGNALS, HELPING TO IMPROVE QUALITY IN POOR/WEAK RECEPTION AREAS THE COMPLETE KIT INCLUDES EVERYTHING YOU'LL NEED TO INSTALL WITH DETAILED INSTRUCTIONS.

ABOUT THE KIT

• suitable for outdoor or loft installation
• TV Aerial 52 Element Gold Kit
• 52 element high gain digital TV aerial gold + installation kit
• High gain wideband analogue / digital TV antenna
• 8 Reflector Elements
• CAI Standard 2
• For use in areas with a weak signal reception
• Improves all available analogue and digital terrestrial UHF TV signals
• Snap to fit parts for quick installation
• Pre wired water tight balun assembly guarantees premium signal reception in all conditions
• Long lasting zinc coated alloy and gold anodising extend aerial life
• Adjustable clamp for easy fine tuning and accurate set-up
• Frequency range 470MHz to 845MHz
• Max Forward Gain = 13.6DBi
• Assembled Length 1464mm



FULL INSTALLATION KIT INCLUDES THE FOLLOWING





• Kit Contains: Front boom, rear boom,
• joining clamp assembly,
• reflector arms,
• reflector bracket assembly,
• reflector elements,
• director elements,
• pre wired balun,
• wall mounting assembly,
• masonry screws,
• raw plugs,
• wood screws,
• adjustable boom clamp,
• 10m coax cable,
• coax connector,
• cable clips.
• Instructions included.

UHF Log Periodic Aerial

This aerial is ideal for reception of UHF channels such as: RTE1, RTE2, TV3 & TG4.

Ideal for the new Irish DTT Television service which will be launched towards the end of 2009.

It is recommend for areas of medium to weak signal.

The most rugged Vision log periodic aerial. Ideal for MATV professional use. Flat 10.5dBi (8.0dBd) gain for Channels 21-68. 18mm double boom sections, 5mm wire elements for low wind loading. Heavy duty galavanised tilt clamp. F-Connectors. Front-to-Back ratio <30dB. Anodised light green in colour. SPECIFICATIONS Type: Log Periodic Connector: F Channels: 21-68 Elements: 30 Gain dBd: 10dBd Front/Back Ratio dB: <30dB Wind Load Kg (120kph): 8.1Kg

Contract aerial

Ideal for reception of UHF channels such as: RTE1, RTE2, TV3 & TG4 in areas of strong signal.

This very popular range of contract aerials represent excellent value for money.

The boom, elements and reflector are made from aluminium for light weight. The aerial is supplied with a clamp for fixing to a mast, suitable for vertical or horizontal mounting. A weather resistant housing allows simple coax connection saddle and clamp terminals. This arange of aerials are unusual due to having a balun fitted Ideal for analogue UHF TV reception in Ireland and digital TV reception in strong signal reception areas. SPECIFICATION No. of Elements 10 Forward Gain 8 - 11dB Front to Back Ratio 17 - 18dB Acceptance Angle 25 deg. These specifications are averaged across the groups.

Televes DTT Aerial

Digital Terrestrial Compatible wideband aerial.

Ideal for the new Irish DTT Television Service which will be launched in the second half of 2009.

This is only suitable for UHF transmitters only.

In our opinion this is the best aerial money can buy. This area is specifically designed to receive digital reception in areas of very weak signal.


Shielded antenna box with F connector.

SPECIFICATION
Elements: 45
Frequency Range MHz: 470-862MHz
Gain dB: 16.5dB
Front/Back Ratio dB: 28dB
Length mm: 1020
Wind Load: 785 N/m²: 33 1080 N/m²: 46
Colour: Orange

Shipping Weight: 2.415 kg

Wall & Mast bracket

Wall & Mast bracket 2 in 1

The useful combined wall bracket and mast is primarily designed to mount a Sky dish where both additional height and stand-off is required.

This can also be used to mount terrestrial aerials.

SPECIFICATION
Stand-off 22 inches
Mast Diameter 1¼ inches
Mast height 55 inches No. of Fixing Holes 6
The finish is Hot Dipped Galvanising.

Loft bracket

This bracket is ideal for fixing either to a barge board or a rafter in a roof space.
It gives approximately 8" stand off and 12" height.
It is suitable for mounting small antennas.
The mast is 1" 18g aluminium.

Chimney Lashing & Mast

12'' Chimney Lashing Kit & mast

LIST OF COMPONENTS
1 x 12" Chimney bracket, painted
1 x 17' lashing wire 2 X J bolts
2 x 2" V bolts
3 x Corner plates

1 x 4' 5" x 1¼" 16g Aluminium Mast

N.B Not sutiable for satellite dish installs, aerials only.

Mast head AMP & PSU

Vision Optima 14dB UHF Mast Amp Kit

OPTIMA Masthead Amplifier Kits

· UK manufactured masthead amplifiers sold as kits with PSU
· Very high performance - low noise, flat gain, good isolation, fully screened in weatherproof housing.
· No frills - Nickel plated connectors, No LED, Black housing
· Easy to install - flip-out design. Supplied with fixing strap
· Sold only as kits with compatible power supply unit